汽车工程

汽车工程 ›› 2021, Vol. 43 ›› Issue (5): 692-696.doi: 10.19562/j.chinasae.qcgc.2021.05.007

• • 上一篇    下一篇

转向主销定位参数和接地点偏距的解析研究

杨一洋(),谢敏松   

  1. 泛亚汽车技术中心有限公司，上海 200135
  • 收稿日期:2019-04-01 修回日期:2021-04-20 出版日期:2021-05-25 发布日期:2021-05-18
  • 通讯作者: 杨一洋 E-mail:bbhg789456@126.com

An Analytical Study of Alignment Parameters and Ground Intersection Offset of Steering Kingpin

Yiyang Yang(),Minsong Xie   

  1. Pan Asia Technical Automotive Center Co. ，Ltd. ，Shanghai 200135
  • Received:2019-04-01 Revised:2021-04-20 Online:2021-05-25 Published:2021-05-18
  • Contact: Yiyang Yang E-mail:bbhg789456@126.com

RichHTML

8

PDF (PC)

322

赞

摘要：

本文中提出一种新的车轮转向主销参数及其接地点偏置距的解析方法，适合于不同车型，包含车轮定轴转动的悬架和虚拟主销悬架的车辆。首先分析了车轮微小转动前后的车轮定位矢量，然后根据空间旋转的变换矩阵，并通过误差修正迭代求解出满足误差阈值的主销定位参数。最后选取某两汽车厂家不同悬架型式的车辆进行验证，实车的数据与解析计算结果基本吻合，表明了推导的车轮转向主销参数及其接地点偏置距解析法的准确性。此外该解析法还可连续表达各转向角度下的主销参数。

关键词: 主销, 车轮转动, 接地点偏置距, 悬架K&C, 解析法

Abstract:

In this paper， an analytical method for the steering kingpin parameters and the offsets of its intersection point with ground surface is proposed， which is suitable for both the suspension with physical kingpin and that with virtual one. First of all， the wheel alignment vectors before and after a micro?rotation are analyzed. Then according to the transforming matrix of spatial rotation and through error correction iteration， the kingpin alignment parameters meeting the requirement of error threshold are solved out. Finally， two vehicles with different types of suspension are analyzed for verification. The well agreement between the real vehicle data and analytical results demonstrates the correctness of the derived analytical method for the steering kingpin parameters and its offsets. Besides， the analytical method can also continuously express the kingpin parameters at different steering angles.

Key words: kingpin, wheel rotation, ground intersection offset, suspension K&C, analytical me?thod