1 |
TATE E, HARPSTER M O, SAVAGIAN P. The electrification of the automobile: from conventional hybrid, to plug-in hybrids, to extended-range electric vehicles[J]. SAE International Journal of Passenger Cars Electronic & Electrical Systems, 2009, 1(1): 156-166.
|
2 |
NAKATA K, SHIMIZU R. Toyota's new combustion technology for high engine thermal efficiency and high engine output performance[J]. Fortschritt-Berichte VDI, Reihe 12. Verkehrstechnik-Fahrzeugtechnik, 2016, Pt.2 TN.799: 1-17.
|
3 |
HAKARIYA M, TODA T, SAKAI M. The new toyota inline 4-cylinder 2.5L gasoline engine[C]. SAE Paper 2017-01-1021.
|
4 |
YAMAJI K, TOMIMATSU M, TAKAGI I, et al. New 2.0L I4 gasoline direct injection engine with Toyota new global architecture concept[C]. SAE Paper 2018-01-0370.
|
5 |
LEE B, OH H, HAN S, et al. Development of high efficiency gasoline engine with thermal efficiency over 42%[C]. SAE Paper 2017-01-2229.
|
6 |
ZHANG G Q, WANG Q, CHEN G, et al. Geely hybrid engine: world class efficiency for hybrid vehicles[C]. 29th Aachen Colloquium Sustainable Mobility, 2020: 65-95.
|
7 |
JUNG D, LEE B, SON J, et al. Development of GDI engine for improving brake thermal efficiency over 44%[C]. ASME 2019 Internal Combustion Engine Division Fall Technical Conference, 2019.
|
8 |
YAN B, YAO M F, MAO B, et al. A comparative study on the fuel economy improvement of a natural gas SI engine at the lean burn the and stoichiometric operation both with EGR under the premise of meeting EU6 emission legislation[C]. SAE Paper 2015-01-1958.
|
9 |
ADOMEIT P, SCHARF J, THEWES M, et al. Extreme lean gasoline technology - best efficiency and lowest emission powertrains[J]. Internationaler Motorenkongress 2017, 2017: 101-122.
|
10 |
SELLERS R, OSBORNE R, CAI W, et al. Designing and testing the next generation of high-efficiency gasoline engine achieving 45% brake thermal efficiency[C]. 28th Aachen Colloquium Automobile and Engine Technology, 2019: 1129-1143.
|
11 |
BRANNYS S, SC M, GEHRKE I S, et al. Maximum efficiency concept of a 1.5l TSI evo for future hybrid powertrains[C]. 28th Aachen Colloquium Automobile and Engine Technology, 2019: 99-120.
|
12 |
BUNCE M, BLAXILL H, COOPER A. Development of both active and passive pre-chamber jet ignition multi-cylinder demonstrator engines[C]. 28th Aachen Colloquium Automobile and Engine Technology, 2019: 907-941.
|
13 |
ATTARD W P, BLAXILL H. A lean burn gasoline fueled pre-chamber jet ignition combustion system achieving high efficiency and low NOx at part load[C]. SAE Paper 2012-01-1146.
|
14 |
FORTE C, BIANCHI G M, CORTI E, et al. Evaluation of the effects of a twin spark ignition system on combustion stability of a high performance PFI engine[J]. Energy Procedia, 2015, 81: 897-906.
|
15 |
BAILKERI N, PRASAD K, RAO S. Performance study on twin plug spark ignition engine at different ignition timings[J]. International Journal of Science & Research, 2013, 2(8): 231-236.
|
16 |
SELLNAU M, CHO K, ZHANG Y. Pathway to 50% brake thermal efficiency using gasoline direct injection compression ignition (GDCI)[C]. 28th Aachen Colloquium Automobile and Engine Technology, 2019: 1145-71.
|
17 |
YANG B, WANG H, YAO M F, et al. Experimental investigation on the effects of injection strategy on combustion and emission in a heavy-duty diesel engine fueled with gasoline[C]. SAE Paper 2017-01-2266.
|
18 |
NAKAI E, GOTO T, EZUMI K, et al. Mazda SKYACTIV-X 2.0L gasoline engine[C]. 28th Aachen Colloquium Automobile and Engine Technology, 2019: 55-78.
|
19 |
NAGASAWA T, OKURA Y, YAMADA R, et al. Thermal efficiency improvement of super-lean burn spark ignition engine by stratified water insulation on piston top surface[J]. International Journal of Engine Research, 2021, 22(5): 1421-1439.
|
20 |
NAKATA K, NOGAWA S, TAKAHASHI D. Engine technologies for achieving 45% thermal efficiency of S.I. engine[C]. SAE Paper 2015-01-1896.
|
21 |
DUBEY A, PARETA A, SHARMA P. Study of multiple spark ignition engines with single spark ignition engines on the basis of engine efficiency and emission characteristics size[J]. International Journal of Current Engineering and Technology, 2014, 3: 14-17.
|
22 |
MATSUURA K. Measurements of flame propagation in a rotary engine using rotor-installed ionization gaps[J]. Transactions of the JSME, 2019, 85(869): 18-00312.
|
23 |
闫博文, 马天宇,蒲运平,等. 混动发动机在不同水温下的喷油控制策略影响试验研究[J]. 汽车工程, 2022, 44(9): 1394-1399.
|
|
YAN B W, MA T Y, PU Y P, et al. Experimental study on the effect of fuel injection control strategy under different coolant temperatures for a hybrid engine[J]. Automotive Engineering, 2022, 44(9): 1394-1399.
|
24 |
KUKKADAPU G, KUMAR K, SUNG C, et al. Autoignition of gasoline and its surrogates in a rapid compression machine Engine Technologies[J]. Proceedings of the Combustion Institute, 2013, 34: 345-352.
|