不同温度与荷电状态下锂离子电池传荷电阻估计*

doi:10.19562/j.chinasae.qcgc.2020.04.005

Abstract

Abstract: Combining the pseudo-two-dimensional model and the aging mechanism of the lithium ion battery, an electrochemical model is built. Based on the model, a conversion method of the charge transfer resistance at different state of charge and temperatures is proposed. The corresponding charge transfer resistance is obtained from the electrochemical impedance spectra of different temperatures and state of charge after four different aging cycles and the conversion method is used to convert the charge transfer resistance at different conditions. The results show that the average error of the conversion is less than 9%. It provides a new idea for battery life state estimation by using the charge transfer resistance at different temperatures and state of charge

Key words: Lithium-ion battery, pseudo two-dimensional model, battery aging, electrochemical impedance spectroscopy, charge transfer resistance

Li Rikang, Wang Xueyuan, Dai Haifeng, Wei Xuezhe. Estimation of Charge Transfer Resistance of Lithium Ion BatteryUnder Different Temperature and State of Charge[J].Automotive Engineering, 2020, 42(4): 445-453.

References

[1] VETTER J, NOVÁK P, WAGNER M R, et al. Ageing mechanisms in lithium-ion batteries[J]. Journal of Power Sources,2005,147(1-2):269-281.
[2] WANG X, WEI X, DAI H, et al. State estimation of lithium ion battery based on electrochemical impedance spectroscopy with on-board impedance measurement system[C]. 2015 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE,2015.
[3] LI S E, WANG B, PENG H, et al. An electrochemistry-based impedance model for lithium-ion batteries[J]. Journal of Power Sources,2014,258:9-18.
[4] GUHA A, PATRA A. Online estimation of the electrochemical impedance spectrum and remaining useful life of lithium-ion batteries[J]. IEEE Transactions on Instrumentation and Measurement,2018:1-14.
[5] DOYLE M, NEWMAN J, GOZDZ A S, et al. Comparison of modeling predictions with experimental data from plastic lithium ion cells[J]. Journal of the Electrochemical Society,1996,143(6):1890-1903.
[6] EKSTROM H, LINDBERGH G. A model for predicting capacity fade due to SEI formation in a commercial graphite/LiFePO4 cell[J]. Journal of the Electrochemical Society,2015,162(6):A1003-A1007.
[7] VERMA P, MAIRE P, PETR NOVÁK. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries[J]. Electrochimica Acta,2010,55(22):6332-6341.
[8] RAMADASS P, HARAN B, GOMADAM P M, et al. Development of first principles capacity fade model for Li-ion cells[J]. Journal of the Electrochemical Society,2004,151(2):A196-A203.
[9] NING G, WHITE R E, POPOV B N. A generalized cycle life model of rechargeable Li-ion batteries[J]. Electrochimica Acta,2006,51(10):2012-2022.
[10] ZHANG Q, WHITE R E . Capacity fade analysis of a lithium ion cell[J]. Journal of Power Sources,2008,179(2):793-798.
[11] KINDERMANN F M, KEIL J, FRANK A, et al. A SEI modeling approach distinguishing between capacity and power fade[J]. Journal of the Electrochemical Society,2017,164(12):E287-E294.
[12] DAI Y, CAI L, WHITE R E. Capacity fade model for spinel LiMn₂O₄ electrode[J]. Journal of The Electrochemical Society,2013,160(1):A182-A190.
[13] DONG T, PENG P, JIANG F. Numerical modeling and analysis of the thermal behavior of NCM lithium-ion batteries subjected to very high C-rate discharge/charge operations[J]. International Journal of Heat and Mass Transfer,2018,117:261-272.
[14] HUANG J, ZHANG J, LI Z, et al. Exploring differences between charge and discharge of LiMn₂O₄/Li half-cell with dynamic electrochemical impedance spectroscopy[J]. Electrochimica Acta,2014,131:228-235.
[15] ZHANG Y, WANG C Y. Cycle-life characterization of automotive lithium-ion batteries with LiNiO₂ cathode[J]. Journal of the Electrochemical Society,2009,156(7):A527-A535.

Estimation of Charge Transfer Resistance of Lithium Ion BatteryUnder Different Temperature and State of Charge

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 10

[1]	Fei Chen,Xiangdong Kong,Yuedong Sun,Xuebing Han,Languang Lu,Yuejiu Zheng,Minggao Ouyang. Progress in Simulation Technology of Lithium-ion Battery Manufacturing Process [J]. Automotive Engineering, 2023, 45(9): 1516-1529.
[2]	Wenchao Guo,Lin Yang,Zhongwei Deng,Jilin Li,Zhixian Fan. Research on Multi-level Fault Warning Method for Lithium-ion Batteries Driven by Cloud Data [J]. Automotive Engineering, 2023, 45(9): 1677-1687.
[3]	Haiqiang Liang,Hongwen He,Kangwei Dai,Bo Pang,Peng Wang. Research on Lithium Ion Battery Life Prediction Method Based on Empirical Aging Model and Mechanism Model for Electric Vehicles [J]. Automotive Engineering, 2023, 45(5): 825-835.
[4]	Yubo Lian,Heping Ling,Qingchan Ma,Qiang Ren,Bin He. Research Progress on Pulse Heating Technology of Lithium-ion Battery for Electric Vehicles [J]. Automotive Engineering, 2023, 45(2): 169-174.
[5]	Jianhao Zhang,Xingqi Gao,Li Zhang. Micro Short Circuit Diagnosis Method of Battery Pack Based on Capacity Increment Curve and Charge Capacity Difference [J]. Automotive Engineering, 2023, 45(2): 191-198.
[6]	Shaobo Xie,Pengcheng Qu,Jiacheng Li,Huiqing Wang,Kun Lang. Study on Coordinated Control of Speed Planning and Energy Management for Connected Hybrid Electric Truck in Vehicle Following Scene [J]. Automotive Engineering, 2022, 44(8): 1136-1143.
[7]	Haiqiang Liang,Hongwen He,Kangwei Dai,Bo Pang. Analysis on the Effects of User Behavior on Battery Aging of Electric Vehicles Based on Big Data [J]. Automotive Engineering, 2022, 44(8): 1212-1217.
[8]	Ping Wang,Qingrui Gong,Ze Cheng,Ji’ang Zhang. An AUKF-Based SOC Estimation Method for Lithium-ion Battery [J]. Automotive Engineering, 2022, 44(7): 1080-1088.
[9]	Yuming Peng,Mingxiao Yuan,Zhuoxin Jing,Yonglin Zhang,Gang Huang. Improved Design of Battery Module Cooling System Under the Influence of Busbar Heat Generation [J]. Automotive Engineering, 2022, 44(6): 859-867.
[10]	Guihong Bi,Xu Xie,Zilong Cai,Zhao Luo,Chenpeng Chen,Xin Zhao. Capacity Estimation of Lithium-ion Battery Based on Deep Learning Under Dynamic Conditions [J]. Automotive Engineering, 2022, 44(6): 868-878.
[11]	Yan Ma,Jiayi Li,Qian Ma,Mingchao Chen. Optimization Strategy of Thermal Management of Power Battery Pack Based on Iterative Dynamic Programming [J]. Automotive Engineering, 2022, 44(5): 709-721.
[12]	Shoutong Liu,Peifeng Huang,Zhonghao Bai. A Review on Research Progress in Failure Mechanism and Simulation Model of Li-ion Battery Related to Mechanical Abuse [J]. Automotive Engineering, 2022, 44(4): 465-475.
[13]	Tao Sun,Xia Zheng,Yuejiu Zheng,Yufang Lu,Ke Kuang,Xuebing Han. Fast Charging Control of Lithium-ion Batteries Based on Electrochemical- thermal Coupling Model [J]. Automotive Engineering, 2022, 44(4): 495-504.
[14]	Ximing Cheng,Wei Hu,Jun Zhai,Ronghua Luo,Pan Zhang,Ye Xu. Study on the Efficiency of Low-voltage Electric System in Battery Electric Vehicles [J]. Automotive Engineering, 2022, 44(4): 601-608.
[15]	Ping Wang,Xiangyuan Peng,Ze Cheng,Ji’ang Zhang. A Multi-time Scale Joint State Estimation Method for Lithium-ion Batteries Based on Data-driven Model Fusion [J]. Automotive Engineering, 2022, 44(3): 362-371.