锂离子电池机械滥用失效机理及仿真模型研究进展

doi:10.19562/j.chinasae.qcgc.2022.04.002

Abstract

Abstract:

This paper focuses on the safety research of traction batteries under mechanical abuse. The failure mechanism of Li-ion batteries under mechanical abuse， such as indentation， nail penetration and compression， are summarized and analyzed， and a variety of analysis models currently used for the simulation on battery mechanical abuse are reviewed in detail. Finally， an outlook of future researches on the failure mechanism， the simulation models and the safety design of battery mechanical abuse are given.

Key words: lithium-ion battery, mechanical abuse, failure mechanism, simulation model

Shoutong Liu,Peifeng Huang,Zhonghao Bai. A Review on Research Progress in Failure Mechanism and Simulation Model of Li-ion Battery Related to Mechanical Abuse[J].Automotive Engineering, 2022, 44(4): 465-475.

Figures/Tables 10

References 75

1	MIKOLAJCZAK C， KAHN M， WHITE K， et al. Lithium-ion batteries hazard and use assessment［M］. Springer Science & Business Media， 2012.
2	CHEN Y， KANG Y， ZHAO Y， et al. A review of lithium-ion battery safety concerns： the issues， strategies， and testing standards［J］. Journal of Energy Chemistry， 2021，59：83-99.
3	SHEIKH M， ELMARAKBI A， ELKADY M. Thermal runaway detection of cylindrical 18650 lithium-ion battery under quasi-static loading conditions［J］. Journal of Power Sources， 2017，370：61-70.
4	SAHRAEI E， CAMPBELL J， WIERZBICKI T. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions［J］. Journal of Power Sources， 2012，220：360-372.
5	LIU B， JIA Y， YUAN C， et al. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading： a review［J］. Energy Storage Materials， 2019，24：85-112.
6	ABADA S， MARLAIR G， LECOCQ A， et al. Safety focused modeling of lithium-ion batteries： a review［J］. Journal of Power Sources， 2016，306：178-192.
7	SAHRAEI E， HILL R， WIERZBICKI T. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity［J］. Journal of Power Sources， 2012，201：307-321.
8	SAHRAEI E， MEIER J， WIERZBICKI T. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells［J］. Journal of Power Sources， 2014，247：503-516.
9	GREVE L， FEHRENBACH C. Mechanical testing and macro-mechanical finite element simulation of the deformation， fracture， and short circuit initiation of cylindrical lithium ion battery cells［J］. Journal of Power Sources， 2012，214：377-385.
10	LIU B， WANG X， CHEN H， et al. A Simultaneous multiscale and multiphysics model and numerical implementation of a core-shell model for lithium-ion full-cell batteries［J］. Journal of Applied Mechanics， Transactions ASME， 2019，86（4）.
11	GOODMAN J K S， MILLER J T， KREUZER S， et al. Lithium-ion cell response to mechanical abuse： three-point bend［J］. Journal of Energy Storage， 2020，28：101244.
12	SANTHANAGOPALAN S， RAMADASS P， ZHANG J Z. Analysis of internal short-circuit in a lithium ion cell［J］. Journal of Power Sources， 2009，194（1）：550-557.
13	LIU B， JIA Y， LI J， et al. Safety issues caused by internal short circuits in lithium-ion batteries［J］. Journal of Materials Chemistry A， 2018，6（43）：21475-21484.
14	SHEIKH M， ELMARAKBI A， REHMAN S. A combined experimental and simulation approach for short circuit prediction of 18650 lithium-ion battery under mechanical abuse conditions［J］. Journal of Energy Storage， 2020，32：101833.
15	YUAN C， WANG L， YIN S， et al. Generalized separator failure criteria for internal short circuit of lithium-ion battery［J］. Journal of Power Sources， 2020，467：228360.
16	FENG X， OUYANG M， LIU X， et al. Thermal runaway mechanism of lithium ion battery for electric vehicles： a review［J］. Energy Storage Materials， 2018，10：246-267.
17	WANG Q， PING P， ZHAO X， et al. Thermal runaway caused fire and explosion of lithium ion battery［J］. Journal of Power Sources， 2012，208：210-224.
18	FINEGAN D P， SCHEEL M， ROBINSON J B， et al. In-operando high-speed tomography of lithium-ion batteries during thermal runaway［J］. Nature Communications， 2015，6（1）.
19	FENG X， ZHENG S， REN D， et al. Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database［J］. Applied Energy， 2019，246：53-64.
20	ZHU J， ZHANG X， SAHRAEI E， et al. Deformation and failure mechanisms of 18650 battery cells under axial compression［J］. Journal of Power Sources， 2016，336：332-340.
21	许辉勇，范亚飞，张志萍，等. 针刺和挤压作用下动力电池热失控特性与机理综述［J］. 储能科学与技术， 2020，9（4）：1113-1126.
	XU H， FAN Y， ZHANG Z， et al. Thermal runaway characteristics and mechanisms of Li-ion batteries for electric vehicles under nail penetration and crush［J］. Energy Storage Science and Technology， 2020，9（4）：1113-1126.
22	范文杰. 18650锂离子电池在机械滥用下的安全性能研究［D］. 太原：太原理工大学， 2019.
	FAN W. Study on safety performance of 18650 lithium ion battery under mechanical abuse［D］. Taiyuan ：Taiyuan University of Technology， 2019.
23	兰凤崇，郑文杰，李志杰，等. 车用动力电池的挤压载荷变形响应及内部短路失效分析［J］. 华南理工大学学报（自然科学版）， 2018，46（6）：65-72.
	LAN F， ZHENG W， LI Z， et al. Compression load-deformation response and internal short circuit failure analysis of vehicle powered batteries［J］. Journal of South China University of Technology（Natural Science Edition）， 2018，46（6）：65-72.
24	XU J， LIU B， HU D. State of charge dependent mechanical integrity behavior of 18650 lithium-ion batteries［J］. Scientific Reports， 2016，6（1）.
25	ZHU J， KOCH M M， LIAN J， et al. Mechanical deformation of lithium-ion pouch cells under in-plane loads-part i： experimental investigation［J］. Journal of the Electrochemical Society， 2020，167（9）：90533.
26	LAI W， ALI M Y， PAN J. Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions［J］. Journal of Power Sources， 2014，248：789-808.
27	XIAO F， XING B， XIA Y. Mechanical response of laterally-constrained prismatic battery cells under local loading［C］. SAE Paper 2020-01-0200.
28	BAI J， WANG Z， GAO T， et al. Effect of mechanical extrusion force on thermal runaway of lithium-ion batteries caused by flat heating［J］. Journal of Power Sources， 2021，507：230305.
29	SAHRAEI E， WIERZBICKI T， HILL R， et al. Crash safety of lithium-ion batteries towards development of a computational model ［C］. SAE Paper 2010-01-1078.
30	KISTERS T， SAHRAEI E， WIERZBICKI T. Dynamic impact tests on lithium-ion cells［J］. International Journal of Impact Engineering， 2017，108：205-216.
31	LI W， XIA Y， CHEN G， et al. Comparative study of mechanical-electrical-thermal responses of pouch， cylindrical， and prismatic lithium-ion cells under mechanical abuse［J］. Science China Technological Sciences， 2018，61（10）：1472-1482.
32	LUO H， XIA Y， ZHOU Q. Mechanical damage in a lithium-ion pouch cell under indentation loads［J］. Journal of Power Sources， 2017，357：61-70.
33	WANG H， SIMUNOVIC S， MALEKI H， et al. Internal configuration of prismatic lithium-ion cells at the onset of mechanically induced short circuit［J］. Journal of Power Sources， 2016，306：424-430.
34	CHUNG S H， TANCOGNE-DEJEAN T， ZHU J， et al. Failure in lithium-ion batteries under transverse indentation loading［J］. Journal of Power Sources， 2018，389：148-159.
35	ZHU X， WANG H， WANG X， et al. Internal short circuit and failure mechanisms of lithium-ion pouch cells under mechanical indentation abuse conditions：An experimental study［J］. Journal of Power Sources， 2020，455：227939.
36	LI H， LIU B， ZHOU D， et al. Coupled mechanical-electrochemical-thermal study on the short-circuit mechanism of lithium-ion batteries under mechanical abuse［J］. Journal of the Electrochemical Society， 2020，167（12）：120501.
37	CAI W， WANG H， MALEKI H， et al. Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells［J］. Journal of Power Sources， 2011，196（18）：7779-7783.
38	LI H， ZHOU D， DU C， et al. Parametric study on the safety behavior of mechanically induced short circuit for lithium-ion pouch batteries［J］. Journal of Electrochemical Energy Conversion and Storage， 2020，18（2）：
39	LIU B， YIN S， XU J. Integrated computation model of lithium-ion battery subject to nail penetration［J］. Applied Energy， 2016，183：278-289.
40	RAMADASS P， FANG W， ZHANG Z J. Study of internal short in a Li-ion cell I. test method development using infra-red imaging technique［J］. Journal of Power Sources， 2014，248：769-776.
41	YAMAUCHI T， MIZUSHIMA K， SATOH Y， et al. Development of a simulator for both property and safety of a lithium secondary battery［J］. Journal of Power Sources， 2004，136（1）：99-107.
42	FINEGAN D P， TJADEN B， HEENAN T M M， et al. Tracking internal temperature and structural dynamics during nail penetration of lithium-ion cells［J］. Journal of The Electrochemical Society， 2017，164（13）：A3285-A3291.
43	HEENAN T M M， TAN C， HACK J， et al. Developments in X-ray tomography characterization for electrochemical devices［J］. Materials Today， 2019，31：69-85.
44	WANG L. Deformation and failure properties of lithium-ion battery under axial nail penetration［J］. Journal of Electrochemical Energy Conversion and Storage， 2021， 18（2）.
45	MAO B， CHEN H， CUI Z， et al. Failure mechanism of the lithium ion battery during nail penetration［J］. International Journal of Heat and Mass Transfer， 2018，122：1103-1115.
46	MA T， CHEN L， LIU S， et al. Mechanics-morphologic coupling studies of commercialized lithium-ion batteries under nail penetration test［J］. Journal of Power Sources， 2019，437：226928.
47	HUANG S， DU X， RICHTER M， et al. Understanding Li-Ion cell internal short circuit and thermal runaway through small， slow and in situ sensing nail penetration［J］. Journal of the Electrochemical Society， 2020，167（9）：90526.
48	YAMANAKA T， TAKAGISHI Y， TOZUKA Y， et al. Modeling lithium ion battery nail penetration tests and quantitative evaluation of the degree of combustion risk［J］. Journal of Power Sources， 2019，416：132-140.
49	WANG J， MEI W， CUI Z， et al. Investigation of the thermal performance in lithium-ion cells during polyformaldehyde nail penetration［J］. Journal of Thermal Analysis and Calorimetry， 2021，145（6）：3255-3268.
50	FINEGAN D P， SCHEEL M， ROBINSON J B， et al. In-operando high-speed tomography of lithium-ion batteries during thermal runaway［J］. Nature Communications， 2015，6（1）.
51	ZHU X， WANG H， ALLU S， et al. Investigation on capacity loss mechanisms of lithium-ion pouch cells under mechanical indentation conditions［J］. Journal of Power Sources， 2020，465：228314.
52	LI Ling，CHEN Xiaoping，HU Rufu. Aging mechanisms and thermal characteristics of commercial 18650 lithium-ion battery induced by minor mechanical deformation［J］. Journal of Electrochemical Energy Conversion and Storage， 2021， 18（2）.
53	JIA Y， LIU B， HONG Z， et al. Safety issues of defective lithium-ion batteries： identification and risk evaluation［J］. Journal of Materials Chemistry A， 2020，8（25）：12472-12484.
54	CANNARELLA J， ARNOLD C B. Stress evolution and capacity fade in constrained lithium-ion pouch cells［J］. Journal of Power Sources， 2014，245：745-751.
55	WANG H， LEONARD D N， MEYER H M， et al. Microscopic analysis of copper current collectors and mechanisms of fragmentation under compressive forces［J］. Materials Today Energy， 2020，17：100479.
56	SAHRAEI E， GILAKI M， LYNCH W， et al. Cycling results of mechanically damaged li-ion batteries［C］.2019 IEEE Electric Ship Technologies Symposium （ESTS）， 2019.
57	LIU Y， XIA Y， ZHOU Q. Effect of low-temperature aging on the safety performance of lithium-ion pouch cells under mechanical abuse condition： a comprehensive experimental investigation［J］. Energy Storage Materials， 2021，40：268-281.
58	JI Y， CHEN X， WANG T， et al. Coupled effects of charge–discharge cycles and rates on the mechanical behavior of electrodes in lithium–ion batteries［J］. Journal of Energy Storage， 2020，30：101577.
59	SAHRAEI E， KAHN M， MEIER J， et al. Modelling of cracks developed in lithium-ion cells under mechanical loading［J］. RSC Advances， 2015，5（98）：80369-80380.
60	BAI Y， WIERZBICKI T. Application of extended Mohr–Coulomb criterion to ductile fracture［J］. International Journal of Fracture， 2010，161（1）：1-20.
61	XU J， LIU B， WANG X， et al. Computational model of 18650 lithium-ion battery with coupled strain rate and SOC dependencies［J］. Applied Energy， 2016，172：180-189.
62	ZHANG C， SANTHANAGOPALAN S， SPRAGUE M A， et al. A representative-sandwich model for simultaneously coupled mechanical-electrical-thermal simulation of a lithium-ion cell under quasi-static indentation tests［J］. Journal of Power Sources， 2015，298：309-321.
63	XU J， LIU B， WANG L， et al. Dynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing［J］. Engineering Failure Analysis， 2015，53：97-110.
64	LIU B， ZHAO H， YU H， et al. Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading［J］. Electrochimica Acta， 2017，256：172-184.
65	DOYLE M. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell［J］. Journal of The Electrochemical Society， 1993，140（6）：1526.
66	KIM G， PESARAN A， SPOTNITZ R. A three-dimensional thermal abuse model for lithium-ion cells［J］. Journal of Power Sources， 2007，170（2）：476-489.
67	SUO Y， LIU J. Thermo‐mechanical coupling analysis of a cylindrical lithium‐ion battery with thermal radiation effect in generalized plane strain condition［J］. International Journal of Energy Research， 2021，45（2）：1988-1998.
68	ZHU J， WIERZBICKI T， LI W. A review of safety-focused mechanical modeling of commercial lithium-ion batteries［J］. Journal of Power Sources， 2018，378：153-168.
69	ZHANG C， XU J， CAO L， et al. Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries［J］. Journal of Power Sources， 2017，357：126-137.
70	ZHU J， LI W， WIERZBICKI T， et al. Deformation and failure of lithium-ion batteries treated as a discrete layered structure［J］. International Journal of Plasticity， 2019，121：293-311.
71	ZHU L， XIA Y， LIU Y， et al. Extending a homogenized model for characterizing multidirectional jellyroll failure in prismatic lithium-ion batteries［J］. Energies， 2021，14（12）：3444.
72	KERMANI G， KESHAVARZI M M， SAHRAEI E. Deformation of lithium-ion batteries under axial loading： analytical model and representative volume element［J］. Energy Reports， 2021，7：2849-2861.
73	LAI W， ALI M Y， PAN J. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions［J］. Journal of Power Sources， 2014，245：609-623.
74	LIAN J， KOCH M， LI W， et al. Mechanical deformation of lithium-ion pouch cells under in-plane loads-part II： computational modeling［J］. Journal of the Electrochemical Society， 2020，167（9）：90556.
75	JIA Y， GAO X， MOUILLET J， et al. Effective thermo-electro-mechanical modeling framework of lithium-ion batteries based on a representative volume element approach［J］. Journal of Energy Storage， 2021，33：102090.

[1]	XU Cheng-Shan, JIANG Fa-Chao, SONG Sen-Nan, TIAN Guang-Yu. [J]. , 2017, 39(1): 9 -14 .
[2]	ZHANG Yi-Bing, 吕Jian-Jun , YUAN Guang-Hui. [J]. , 2016, 38(12): 1467 -1470 .
[3]	JIA Ji-De, WU Chun-Zhi, JIA Xiang-Yu, REN Gang, HAN Jia-Jia. [J]. , 2017, 39(1): 97 -101 .
[4]	RONG Bing, XIAO Pan, ZHOU Jian-Wen, LIU Yi-Lu. [J]. , 2017, 39(2): 214 -219 .
[5]	WANG Zhen, CUI Ya-Hui-.Liu-Kai, XU Lin. [J]. , 2017, 39(3): 304 -310 .
[6]	GUAN Xin, XU Liang, GUO Rui, WANG Bo, SONG Hai-Yan. [J]. , 2017, 39(3): 311 -316 .
[7]	JIN Geng-Ri, GUAN Xin, ZHAN Jun, GUO Rui. [J]. , 2017, 39(3): 364 -368 .
[8]	XIONG Xing-Wang, GAO Jun-Hua, ZHOU Tao, YU Jin-Tao. [J]. , 2017, 39(4): 381 -385 .
[9]	CAO Li-Feng, ZHOU Shou-Qin, XIE Xiao-Peng. [J]. , 2017, 39(4): 401 -406 .
[10]	Liu Zhiqiang & Pu Xian. An Experimental Study on Anti-lock Braking of Continuous Regenerative Braking System in Electric Vehicles[J]. , 2018, 40(7): 804 .

[1]	Fei Chen,Xiangdong Kong,Yuedong Sun,Xuebing Han,Languang Lu,Yuejiu Zheng,Minggao Ouyang. Progress in Simulation Technology of Lithium-ion Battery Manufacturing Process [J]. Automotive Engineering, 2023, 45(9): 1516-1529.
[2]	Wenchao Guo,Lin Yang,Zhongwei Deng,Jilin Li,Zhixian Fan. Research on Multi-level Fault Warning Method for Lithium-ion Batteries Driven by Cloud Data [J]. Automotive Engineering, 2023, 45(9): 1677-1687.
[3]	Haiqiang Liang,Hongwen He,Kangwei Dai,Bo Pang,Peng Wang. Research on Lithium Ion Battery Life Prediction Method Based on Empirical Aging Model and Mechanism Model for Electric Vehicles [J]. Automotive Engineering, 2023, 45(5): 825-835.
[4]	Yubo Lian,Heping Ling,Qingchan Ma,Qiang Ren,Bin He. Research Progress on Pulse Heating Technology of Lithium-ion Battery for Electric Vehicles [J]. Automotive Engineering, 2023, 45(2): 169-174.
[5]	Jianhao Zhang,Xingqi Gao,Li Zhang. Micro Short Circuit Diagnosis Method of Battery Pack Based on Capacity Increment Curve and Charge Capacity Difference [J]. Automotive Engineering, 2023, 45(2): 191-198.
[6]	Ping Wang,Qingrui Gong,Ze Cheng,Ji’ang Zhang. An AUKF-Based SOC Estimation Method for Lithium-ion Battery [J]. Automotive Engineering, 2022, 44(7): 1080-1088.
[7]	Yuming Peng,Mingxiao Yuan,Zhuoxin Jing,Yonglin Zhang,Gang Huang. Improved Design of Battery Module Cooling System Under the Influence of Busbar Heat Generation [J]. Automotive Engineering, 2022, 44(6): 859-867.
[8]	Guihong Bi,Xu Xie,Zilong Cai,Zhao Luo,Chenpeng Chen,Xin Zhao. Capacity Estimation of Lithium-ion Battery Based on Deep Learning Under Dynamic Conditions [J]. Automotive Engineering, 2022, 44(6): 868-878.
[9]	Yan Ma,Jiayi Li,Qian Ma,Mingchao Chen. Optimization Strategy of Thermal Management of Power Battery Pack Based on Iterative Dynamic Programming [J]. Automotive Engineering, 2022, 44(5): 709-721.
[10]	Tao Sun,Xia Zheng,Yuejiu Zheng,Yufang Lu,Ke Kuang,Xuebing Han. Fast Charging Control of Lithium-ion Batteries Based on Electrochemical- thermal Coupling Model [J]. Automotive Engineering, 2022, 44(4): 495-504.
[11]	Ximing Cheng,Wei Hu,Jun Zhai,Ronghua Luo,Pan Zhang,Ye Xu. Study on the Efficiency of Low-voltage Electric System in Battery Electric Vehicles [J]. Automotive Engineering, 2022, 44(4): 601-608.
[12]	William Cai,Maotong Yang,Yang Liu,Daohui Li. SiC Power Module Packaging Technologies and Prospects [J]. Automotive Engineering, 2022, 44(4): 638-648.
[13]	Ping Wang,Xiangyuan Peng,Ze Cheng,Ji’ang Zhang. A Multi-time Scale Joint State Estimation Method for Lithium-ion Batteries Based on Data-driven Model Fusion [J]. Automotive Engineering, 2022, 44(3): 362-371.
[14]	Hongrui Liu,Donghua Gu,Hairui Li,Bin Zhang,Jing Qian. A P-C-C-P Equalizer and Its Control Methods for Lithium-ion Batteries in Series [J]. Automotive Engineering, 2022, 44(3): 372-378.
[15]	Li Zhang,Xingqi Gao,Jianhao Zhang. Short-circuit Current Estimation of Battery Pack Based on Average- difference Model [J]. Automotive Engineering, 2021, 43(11): 1702-1709.

A Review on Research Progress in Failure Mechanism and Simulation Model of Li-ion Battery Related to Mechanical Abuse

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 10

References 75

Related Articles 15

Metrics

Comments

Recommended 10