Automotive Engineering ›› 2022, Vol. 44 ›› Issue (8): 1272-1279.doi: 10.19562/j.chinasae.qcgc.2022.08.016
Special Issue: 新能源汽车技术-动力电池&燃料电池2022年
Previous Articles Next Articles
Huanhuan Bao1,2,Lei Zhang3,Qi Liu1,2(),Jianqin Fu1,2,Shuqian Wang1,Quan Wu3,Jingping Liu1,2
Received:
2022-03-12
Revised:
2022-04-08
Online:
2022-08-25
Published:
2022-08-25
Contact:
Qi Liu
E-mail:hnuliuqi@hnu.edu.cn
Huanhuan Bao,Lei Zhang,Qi Liu,Jianqin Fu,Shuqian Wang,Quan Wu,Jingping Liu. Experimental Study on Transient Performance of Fuel Cell Air Compressor Based on Road Test Cycle Conditions[J].Automotive Engineering, 2022, 44(8): 1272-1279.
1 | 朱明原, 刘文博, 刘杨, 等. 氢能与燃料电池关键科学技术: 挑战与前景[J].上海大学学报(自然科学版), 2021, 27(3): 411-443. |
ZHU M, LIU W, LIU Y, et al. Key scientific and technological principles of hydrogen energy and fuel cells: challenges and prospects [J]. Journal of Shanghai University (Natural Science Edition), 2021, 27(3): 411-443. | |
2 | 李龙, 梁前超, 何俊能, 等. 车用燃料电池空压机性能预测研究[J]. 兵器装备工程学报, 2020, 41(6): 22-25. |
LI L, LIANG Q, HE J, et al. Study on performance prediction of vehicle fuel cell air compressor[J]. Journal of Ordnance Equipment Engineering, 2020, 41(6): 22-25. | |
3 | LI Y, PEI P, MA Z, et al. Analysis of air compression, progress of compressor and control for optimal energy efficiency in proton exchange membrane fuel cell[J]. Renewable and Sustainable Energy Reviews, 2020, 133: 110304 |
4 | HU D, YANG L, YI F, et al. Optimization of speed response of super-high-speed electric air compressor for hydrogen fuel cell vehicle considering the transient current[J]. International Journal of Hydrogen Energy, 2021, 46: 27183-27192. |
5 | 严彦, 周利彪, 白文涛, 等. 燃料电池用空气压缩机的研究现状[J].机电工程, 2021, 38(12): 1513-1519. |
YAN Y, ZHOU L, BAI W, et al. Research status of air compressors in fuel cells[J]. Mechanical & Electrical Engineering Magazine, 2021, 38(12): 1513-1519. | |
6 | 马明俊, 张成义. 大流量氢燃料电池用离心式空气压缩机气动设计与性能试验[J]. 动力工程学报, 2021, 41(12):1090-1095. |
MA M, ZHANG C. Aerodynamic design and performance test of high flow centrifugal air compressor for hydrogen fuel cell[J]. Journal of Chinese Society of Power Engineering, 2021, 41(12):1090-1095. | |
7 | LIU Y, ZHAO Y, YANG Q, et al. Performance study of centrifugal air compressor for proton exchange membrane fuel cell systems[J]. Energy Science & Engineering, 2022, 10: 208-218. |
8 | 赵冬冬, 华志广, 梁艳, 等. 飞机燃料电池的离心空气压缩机特性研究[J]. 航空科学技术, 2017, 28(2): 64-68. |
ZHAO D, HUA Z, LIANG Y, et al. Centrifugal air compressor characteristic research on the fuel cells in the aircraft [J]. Aeronautical Science & Technology, 2017, 28(2):64-68. | |
9 | CHEN S, ZUO S, WU Z. Aerodynamic performance modeling of the centrifugal compressor and stability analysis of the compression system for fuel cell vehicles[J]. SAE International Journal of Advances and Current Practices in Mobility, 2021, 3(5): 2325-2336 |
10 | WAN Y, GUAN J, XU S. Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application[J]. International Journal of Hydrogen Energy, 2016, 42(8): 5590-5605. |
11 | HE Y, XING L, ZHANG Y, et al. Development and experimental investigation of an oil-free twin-screw air compressor for fuel cell systems[J]. Applied Thermal Engineering, 2018, 145: 755-762. |
12 | HAN J, YU S, YI S. Adaptive control for robust air flow management in an automotive fuel cell system[J]. Applied Energy, 2017, 190:73-83. |
13 | SONG D, ZENG F, ZENG X, et al. Research on dynamic decoupling control of air supplying loop in fuel cell system based on pressure compensation[J]. Journal of Mechanical Science and Technology, 2021, 35(1): 2677-2688. |
14 | ZHAO D, XU L, HUANGFU Y, et al. Semi-physical modeling and control of a centrifugal compressor for the air feeding of a PEM fuel cell[J]. Energy Conversion and Management, 2017, 154: 380-386. |
15 | LIU Z, LI L, DING Y, et al. Modeling and control of an air supply system for a heavy duty PEMFC engine[J]. International Journal of Hydrogen Energy, 2016, 41(36): 16230-16239. |
16 | JIN J, PAN J, LU Z, et al. An investigation of a high-performance centrifugal compressor with a variable map width enhancement slot for proton exchange membrane fuel cell systems in commercial vehicle application[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2021, 235(1): 288-300. |
17 | 沈浩生, 张均东, 杨柏丞, 等. 一种考虑传热现象的船用压气机等熵效率分区域建模方法[J].船舶工程,2020,42(7):76-87. |
SHEN H, ZHANG J, YANG B, et al. A zonal modeling approach of marine compressor isentropic efficiency with consideration of heat transfer phenomenon[J]. Ship Engineering, 2020, 42(7): 76-87. | |
18 | 郭爱, 李奇, 陈维荣, 等. 车用燃料电池阴极系统特性[J]. 西南交通大学学报, 2013, 48(6): 1052-1058. |
GUO A, LI Q, CHEN W, et al. Characteristics of cathode system in fuel cells for electric vehicles[J]. Journal of Southwest Jiaotong University, 2013, 48(6): 1052-1058. |
[1] | Weifeng Kong,Chuan Fang,Jihong Liu,Jianqiu Li,Feiqiang Li,Shengtao Huang,Xingwang Zhao,Yan Shi,Dian Yuan,Liangfei Xu,Peng Sun,Enfei Zhou,Minggao Ouyang. Research on Fuel Cell Cold Start Strategy Based on Single Cell Impedance Consistency Purging [J]. Automotive Engineering, 2024, 46(2): 260-268. |
[2] | Xinjie Yuan,Fang Liu,Zhongjun Hou. Self-adaptive Porous Structure Detection of the Catalyst Layer in PEMFCs Based on GA-PSO-Otsu Algorithm [J]. Automotive Engineering, 2023, 45(9): 1702-1709. |
[3] | Youwei Xu,Guiyin Chen,Lü Ping,Zhenrui Zhao,Yangyang Zhao,Maoxi Sun,Danmin Xing. Simulation Analysis and Test Validation of Fuel Cell System [J]. Automotive Engineering, 2023, 45(9): 1710-1719. |
[4] | Wanteng Wang,Nan Li,Xueyi Bai,Dou Yang,Hang Li,Guijing Li. Research on Effect of Gas Diffusion Layer Layered Design on the Performance of PEMFC Stack [J]. Automotive Engineering, 2023, 45(9): 1720-1727. |
[5] | Junzhao Jiang,Wenhao Yang,Bin Peng,Ting Guo,Yekai Xu,Guozhuo Wang. Driving Range Prediction of Fuel Cell Vehicles Based on Energy Consumption Weighting Strategy [J]. Automotive Engineering, 2023, 45(12): 2357-2365. |
[6] | Shuo Zhang,Xu Cai,Chunmei Zhang,Libo Lan,Xuqi Zhang,Yisong Chen. Life Cycle Assessment Research and Uncertainty Analysis of Hydrogen Fuel Cell Heavy-Duty Commercial Vehicles [J]. Automotive Engineering, 2023, 45(12): 2366-2386. |
[7] | Zhongwen Zhu,Xin Wang,Weihai Jiang,Cheng Li. Research on Integrated Thermal Management System of Hydrogen Fuel Cell Vehicle [J]. Automotive Engineering, 2023, 45(11): 1991-2000. |
[8] | Lü Ping,Xin Sun,Youwei Xu,Bao Zhang,Jiahui Xu,Danmin Xing. An Experimental Study on Low Temperature Shutdown and Purging of Vehicle Fuel Cell Stack [J]. Automotive Engineering, 2023, 45(11): 2123-2129. |
[9] | Chenxu Shi,Changqing Du,Chao Wang,Xingyi Li,Jiaming Zhang. Control of Gas Supply System of High Power Fuel Cell Engine for Vehicle [J]. Automotive Engineering, 2023, 45(11): 2148-2156. |
[10] | Jiqing Chen,Changjing Zeng,Yunjiao Zhou,Fengchong Lan,Qingshan Liu. Flow Field Structure Optimization and Performance Improvement with Pentagon Baffle for Proton Exchange Membrane Fuel Cell [J]. Automotive Engineering, 2023, 45(10): 1862-1875. |
[11] | Hui Zhou,Zhi’en Liu,Yongchao Li,Chihua Lu,Changqing Du. Study on the Impact of Defective Single Cell on the Performance of Vehicular Proton Exchange Membrane Fuel Cell [J]. Automotive Engineering, 2023, 45(10): 1876-1884. |
[12] | Zhiming Zhang,Jiaqi Pan,Tong Zhang. Analysis of Key Influencing Factors on Rotor Critical Speed of Centrifugal Air Compressor for Fuel Cell Vehicles [J]. Automotive Engineering, 2022, 44(9): 1386-1393. |
[13] | Hang Li,Zunyan Hu,Jiayi Hu,Jiachen Dong,Jianqiu Li,Liangfei Xu,Ouyang Minggao,Yu Bu,Lijun Wang,Zhidong Qin. Design, Analysis and Validation of Novel Distributed Drive Liquid Hydrogen Fuel Cell Heavy Commercial Vehicles [J]. Automotive Engineering, 2022, 44(8): 1183-1198. |
[14] | Xiaodong Wei,Bo Liu,Jianghao Leng,Xingyu Zhou,Chao Sun,Fengchun Sun. Research on Eco-driving of Fuel Cell Vehicles via Convex Optimization [J]. Automotive Engineering, 2022, 44(6): 851-858. |
[15] | Chuan Fang,Dian Yuan,Yangbin Shao,Liangfei Xu,Feiqiang Li,Zunyan Hu,Jianqiu Li,Bao Zhou,Wei Dai. Technical Breakthrough of New Generation Fuel Cell System for Winter Olympics Application Environment [J]. Automotive Engineering, 2022, 44(4): 535-544. |