汽车工程

汽车工程 ›› 2020, Vol. 42 ›› Issue (4): 484-490.doi: 10.19562/j.chinasae.qcgc.2020.04.010

• • 上一篇    下一篇

汽车自动变速器阀体阀芯孔内壁面质量检测系统的研发*

朱烨添1,2, 沈鸿1, 张文俊1, 林立1, 吴少腾2, 敖云轲2, 万禹2, 赵之谦2, 裴景玉2   

  1. 1.上汽通用汽车有限公司动力总成制造工程部,上海 201206;
    2.上海交通大学机械与动力工程学院,上海 200240)
  • 出版日期:2020-04-25 发布日期:2020-05-12
  • 通讯作者: 朱烨添,硕士,E-mail:zjsyzyt@163.com
  • 基金资助:
    *上海市科学技术委员会“科技创新行动计划”(17DZ1101200)资助

Research and Development of Quality Inspection System for Inner Wall ofValve Core Holes of Vehicle Automatic Transmission Valve Body

Zhu Yetian1,2, Shen Hong1, Zhang Wenjun1, Lin Li1, Wu Shaoteng2, Ao Yunke2,Wan Yu2, Zhao Zhiqian2 & Pei Jingyu2   

  1. 1.Powertrain Manufacturing Engineering Department of SAIC General Motors Co., Ltd., Shanghai 201206;
    2.School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240
  • Online:2020-04-25 Published:2020-05-12

PDF (PC)

494

赞

摘要： 针对汽车自动变速器阀体的自动化加工质量检测,本文中提出了一套基于工业内窥镜拍摄的自动化检测系统设计方案。该方案融合机械、电控、视觉、软件等多个模块,以实现自动化视觉检测;并进行系统关键部分的原型研发及拍摄测试。结果表明,系统能够有效完成阀孔内壁面的完整图像拍摄和缺陷特征提取,有助于提高检测精度,且数据整理方便,有助于提升工厂的自动化水平。

关键词: 变速器阀体, 工业内窥镜, 机器视觉, 检测, 软件开发

Abstract: For the automatic processing quality inspection of automobile automatic transmission valve body, a design scheme of automatic inspection system based on industrial endoscope photography is proposed. The scheme integrates several modules such as machinery, electronic control, vision and software, to realize automatic visual inspection, and prototype development and shooting test of key parts of the system are carried out. The results show that the system can effectively complete the full-view image shooting and defect feature extraction of the inner wall within the valve hole, which contributes to improve the detection accuracy, to facilitate data archiving, and finally to improve the automation level of the factory

Key words: transmission valve body, industrial endoscope, machine vision, inspection, software development