| 1 |
LIU K, ZHANG B F, ZHANG Y C, et al. Flow structure around a low-drag Ahmed body[J]. Journal of Fluid Mechanics, 2021, 913: A21.
|
| 2 |
WANG J, MINELLI G, CAFIERO G, et al. Validation of PANS and effects of ground and wheel motion on the aerodynamic behaviours of a square-back van[J]. Journal of Fluid Mechanics, 2023, 958: A47.
|
| 3 |
张之豪,王宇萌,王庆洋,等.利用自动PIV技术测量DrivAer模型三维尾流场结构[C]. 2020中国汽车工程学会年会论文集, 2020:6.
|
|
ZHANG Z H, WANG Y M, WANG Q Y, et al. Experimental study on three-dimensional wake structure of DrivAer standard model using auto-PIV[C]. 2020 SAE China Annual Meeting, 2020:6.
|
| 4 |
SELLAPPAN P, MCNALLY J, ALVI F S. Time-averaged three-dimensional flow topology in the wake of a simplified car model using volumetric PIV[J]. Experiments in Fluids, 2018, 59: 1-13.
|
| 5 |
刘锦生,徐胜金,王庆洋,等.基于物理模型的汽车空气动力学研究综述[J].实验流体力学,2020,34(1):38-48.
|
|
LIU J S, XU S J, WANG Q Y, et al. Review of automotive aerodynamics research based on physical models[J]. Journal of Experiments in Fluid Mechanics, 2020, 34(1): 38-48.
|
| 6 |
WANG Q Y, GAN L, XU S J, et al. Vortex evolution in the near wake behind polygonal cylinders[J]. Experimental Thermal and Fluid Science, 2020, 110: 109940.
|
| 7 |
GRANDEMANGE M, GOHLKE M, CADOT O. Bi-stability in the turbulent wake past parallelepiped bodies with various aspect ratios and wall effects[J]. Physics of Fluids, 2013, 25(9).
|
| 8 |
CAPONE A, ROMANO G P. Investigation on the effect of horizontal and vertical deflectors on the near-wake of a square-back car model[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2019, 185: 57-64.
|
| 9 |
王汉封, 张运平, 邹超. 导流板对25°倾角Ahmed类车体尾流与气动阻力的影响[J]. 实验流体力学, 2014, 28(1): 31-37.
|
|
WANG H F, ZHANG Y P, ZOU C. Effects of deflectors on the wake and aerodynamic drag of a 25° slant angle Ahmed model[J]. Journal of Experiments in Fluid Mechanics, 2014, 28(1): 31-37.
|
| 10 |
汪怡平, 郭承奇, 王涛, 等. 基于自由变形技术的Ahmed模型气动减阻优化[J]. 北京理工大学学报, 2018, 38(3): 221-228.
|
|
WANG Y P, GUO C Q, WANG T, et al. Aerodynamic drag reduction of Ahmed model based on free form deformation[J]. Transactions of Beijing Institute of Technology, 2018, 38(3): 221-228.
|
| 11 |
庄礼贤, 尹协远, 马晖扬. 流体力学[M].合肥:中国科学技术大学出版社, 2009:328-329.
|
|
ZHUANG L X, YIN X Y, MA H Y. Fluid mechanics[M]. Hefei: University of Science and Technology of China Press, 2009:328-329.
|
| 12 |
ZHANG B F, ZHOU Y, TO S. Unsteady flow structures around a high-drag Ahmed body[J]. Journal of Fluid Mechanics, 2015, 777: 291-326.
|
| 13 |
HE K, MINELLI G, WANG J, et al. Numerical investigation of the wake bi-stability behind a notchback Ahmed body[J]. Journal of Fluid Mechanics, 2021, 926: A36.
|
| 14 |
LIU J S, ZHANG Z H, WANG Y M, et al. Experimental study on the three-dimensional wake structure of the DrivAer standard model[J]. Journal of Visualization, 2021, 24: 443-460.
|
| 15 |
LIU X, FU Q X, XU S J. Experimental study of underbody flow of electric vehicle[C]. The 1st International Conference on Intelligent Optimization of Aerodynamics and Heat Flow Control, June 14-16, 2023.
|
| 16 |
中国汽车工程学会汽车空气动力学分会. 乘用车空气动力学仿真技术规范:T/CSAE 112—2019[S].[2019-07-10].
|
|
China-SAE Automotive Aerodynamics Committee. Technical specification of passenger car aerodynamic numerical simulation:T/CSAE 112—2019[S].[2019-07-10].
|
| 17 |
ASHTON N, REVELL A. Key factors in the use of DDES for the flow around a simplified car[J].International Journal of Heat and Fluid Flow, 2015, 54(43):236-249.
|